Worker privacy vs GPS safety: finding the right balance for lone worker alarms
Why the balance matters
Lone workers face risks that office staff rarely think about. A fall in a remote stockroom, a medical event during a late shift, or an aggressive encounter on a client visit, any of these can leave a worker unable to call for help. An employee duress alarm with GPS tracking can summon assistance fast, but the same GPS feature that saves time also raises questions about privacy. Employers want to protect their people, but workers worry about being watched every minute of the day. Finding a middle ground is possible, and it starts with understanding what each side of the equation actually needs.
What GPS tracking actually does
A typical lone worker alarm sends an alert when a worker triggers the device or when sensors detect a fall or lack of movement. The GPS component relays the worker's location so responders know where to go. Without that location data, a duress alarm is little more than a panic button, it tells someone that something is wrong, but not where. For a worker in a sprawling warehouse, a rural property, or a multi-storey building, that difference can be life-saving.
Yet the same GPS signal that helps a responder find a worker can also, in theory, be used to track that worker's movements throughout a shift. Every stop, every detour, every break becomes visible. That level of visibility can feel intrusive, especially if the worker has no say in when the tracking is active or who sees the data.
Two approaches to managing the tension
Organisations typically choose between two broad strategies. One gives the employer full access to location data during working hours, arguing that safety requires complete visibility. The other limits GPS use to alarm events only, so location is shared only when the worker activates the duress alarm or the system detects an incident. Each approach has its own trade-offs.

Continuous location monitoring
With this model, the employer can see where every lone worker is at any time during their shift. The main advantage is speed, if a worker fails to respond to a check-in, the last known location is already on the system, and help can be dispatched immediately without waiting for the worker to press a button. This approach also helps with shift management and route planning, because the employer can see where workers are relative to their scheduled tasks.
The downside is obvious: constant surveillance. Workers may feel that their every stop for a coffee, a bathroom break, or a personal phone call is being logged and scrutinised. Over time, this can erode trust and create a sense of being managed by a machine rather than a human supervisor. Some workers may even disable the device during parts of their shift to regain privacy, which defeats the purpose of the system entirely.
Event-only GPS activation
The alternative is to keep GPS tracking dormant until the worker triggers the duress alarm or the device detects a fall or man-down event. At that moment, the system captures the worker's location and transmits it along with the alert. Outside of an alarm event, no location data leaves the device.
This model respects the worker's privacy much more. There is no feeling of being watched, and no risk that location data will be used for performance monitoring or disciplinary purposes. Workers tend to trust the system more and are less likely to resist wearing the device.
The trade-off is a slight delay. If a worker becomes incapacitated without triggering the alarm, for example, a sudden medical event that doesn't involve a fall, the system may not know where to send help until a missed check-in triggers a process that eventually activates the GPS. In practice, many modern devices combine fall detection, man-down alerts, and check-in timers, so the window of delay is usually small. But it is still a factor worth weighing.
What to consider when choosing
The right balance depends on the work environment and the level of risk. A few questions can help clarify which approach suits a particular team.

- How predictable are the worker's locations during a shift? A field technician visiting known sites may need location data less urgently than a security guard patrolling a large, variable site.
- How quickly does a delayed location matter? In high-risk settings such as remote construction or hazardous material handling, every second counts. In lower-risk environments, a few extra seconds may be acceptable.
- What does the team think? Workers who understand why location data is collected and how it is protected are more likely to accept continuous monitoring. A policy that feels secretive or imposed tends to create resistance.
- What does the law say? Privacy regulations vary by jurisdiction. Some require explicit consent for continuous tracking, while others limit how long location data can be stored. Legal advice is often worth the investment.
Technology can help bridge the gap
Modern lone worker devices offer more flexibility than the simple binary of "always on" or "never on." Some systems allow the worker to choose when GPS is active, giving them control while still providing a safety net. Others use geofencing, location tracking activates only when the worker enters a predefined high-risk zone. A worker in a client's office might have GPS off, but the moment they step into a known remote area, the system begins recording location data.
Another option is delayed transmission. The device captures location data but stores it locally, only sending it to the monitoring centre when an alarm is triggered. This means the data exists for safety purposes but is never seen by anyone unless there is an incident. For workers who are uneasy about constant visibility, this can be a reassuring compromise.
An example of a wearable device that supports flexible GPS settings is the Mercari Lone Worker Alarm NZ. It provides SOS, fall detection, man-down alerts, and two-way voice communication without mandatory monitoring fees. That kind of flexibility allows an employer to configure the system to match the privacy expectations of their team while still keeping safety as the top priority.
Policy matters as much as technology
No matter which technical approach you choose, a clear written policy is essential. The policy should state what data is collected, when it is collected, who can access it, how long it is stored, and what it will and will not be used for. Workers need to know that location data will not be used to discipline them for taking a slightly longer break or for visiting an unauthorised location during lunch.
It also helps to involve workers in the decision. A safety committee or a simple anonymous survey can reveal what the team is comfortable with. When workers feel they have a say in how the system operates, they are far more likely to wear the device consistently and use it correctly.
Realistic expectations
No system is perfect. A worker who is determined to avoid tracking can leave the device in the car, turn it off, or find other ways to circumvent it. That is why trust and transparency matter more than any technical feature. A worker who understands that the device is there to protect them, not to monitor them, will be far more likely to cooperate.

At the same time, employers who treat location data as a safety tool rather than a management tool will find it easier to earn that trust. The Mercari Lone Worker Alarm NZ is one example of a device built around the idea that safety and privacy can coexist. By giving workers a wearable alarm that works without a mandatory monitoring contract, it leaves the choice of monitoring model in the hands of the employer and the team.
The goal is not to eliminate all privacy concerns, that is probably impossible with any location-based system. The goal is to reduce those concerns to a level that both sides can accept, so the device does its job when it is needed most. When a worker presses that duress alarm, the last thing anyone wants is a debate over whether the GPS should have been on.
Mercari Lone Worker Alarm NZ on social media
YouTube